NOE 360-180 WFN GC Rossi 92
-
- Posts: 125
- Joined: 24 Jun 2015 21:31
- Location: Canton
- Has thanked: 21 times
- Been thanked: 36 times
NOE 360-180 WFN GC Rossi 92
An experiment with powder coated gas check bullets.
Crimped in the crimp groove these cycle and feed just fine in the 357 mag cases.
Going to work on some loads with 296,2400 and lil Gun powders.
Load card was found through the NOE Forum.
Crimped in the crimp groove these cycle and feed just fine in the 357 mag cases.
Going to work on some loads with 296,2400 and lil Gun powders.
Load card was found through the NOE Forum.
You do not have the required permissions to view the files attached to this post.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
- GasGuzzler
- Moderator
- Posts: 2757
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: NOE 360-180 WFN GC Rossi 92
I mentioned a very similar NOE 360-180 GC mold yesterday (maybe on the Rossi rifle forum) for pigs. I size to .358 and lube mine the old fashion way but I can still get them to feed in the SRC and chamber in the Blackhawk but it's a full cylinder.
10-02-2017 EDIT to remove dead Photobucket links
See below
10-02-2017 EDIT to remove dead Photobucket links
See below
Last edited by GasGuzzler on 02 Oct 2017 06:39, edited 1 time in total.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: NOE 360-180 WFN GC Rossi 92
Good looking bullets jdl & GC! 35 caliber bullet making must be in the air. Just finish casting my TLC359-190-RF. They were cast with 60/40 linotype/wheel weights and lubed on my Lyman 4500 with White Label Lube's 2500+.
The batch was sized .359", but they are for use in four different firearms. For use in the Rossi, they will be sized to .357".
The batch was sized .359", but they are for use in four different firearms. For use in the Rossi, they will be sized to .357".
Michael
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
-
- Posts: 125
- Joined: 24 Jun 2015 21:31
- Location: Canton
- Has thanked: 21 times
- Been thanked: 36 times
Re: NOE 360-180 WFN GC Rossi 92
Got a few more to test,once the snow melts(got 4 more inches today).Spring doesn't show up around here till the end of April.
Lee 225-55 and Lee 358-125 rfn.
Lee 225-55 and Lee 358-125 rfn.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 125
- Joined: 24 Jun 2015 21:31
- Location: Canton
- Has thanked: 21 times
- Been thanked: 36 times
Re: NOE 360-180 WFN GC Rossi 92
4" of snow Friday. 72 degrees forcast for Wednesday Hopefully I will get out this week.
-
- Posts: 75
- Joined: 23 Sep 2017 15:37
- Location: Pittsburgh PA
- Has thanked: 15 times
- Been thanked: 15 times
Re: NOE 360-180 WFN GC Rossi 92
I bought the 360-180 WFN mold for my .357 maximum contender but I'm considering shooting it in my Rossi 92 also. I take it the Rossi can stabilize this bullet?
Anyone got a starting load recommendation for H110/W296?
Anyone got a starting load recommendation for H110/W296?
You do not have the required permissions to view the files attached to this post.
- GasGuzzler
- Moderator
- Posts: 2757
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: NOE 360-180 WFN GC Rossi 92
I use XX.X gr Lil Gun (hot) for the Rossi because it needs more FPS and will chamber 1.663" (load those to 1.66") but I actually use W296 for the Blackhawk load with my similar NOE bullet (mine has one big grease groove and two crimp options) because it won't swallow 1.66".
W296
16.0gr
1.640" OAL
W296
16.0gr
1.640" OAL
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.