My meager collection
Posted: 13 Oct 2023 08:17
As an addendum to my intro post, my Rossi.
16" blued model that Ive completely disassembled and smoothed the action and all associated parts inside, smoothed the loading port, worked the trigger and sear, narrowed the loading gate cover "spring", hand lapped the bore with a lead slug(s), removed and stripped the wood restained it and refinished with tru-oil. Changed out the main and ejector springs, added a SS follower, modified the rear buckhorn and added a Dawson FO front. Finally I lightly polished all the blued metal with a light touch of Flitz. I havent changed the mag spring yet, I have a new SS one but didnt install it yet because the original is performing fine so far. I did trim it a little but probably not as much as most do.
Ive only had this sweetie for about 5 months and already put well over 4000 rds through it and other than a few 357 rounds that I loaded a bit long with a marginal bullet Ive not had a single issue with this great little trapper. I mean Im really impressed by it. Accuracy is simply outstanding with just about everything Ive loaded. Granted, the loads mostly are known(to me) to be pretty accurate in most firearms and performed just as good in the rossi. I was a bit hesitant to wager my money on a rossi and Ive been kicking myself in the butt now for now doing it sooner re: cheaper.
To top all of this off this sample will hold 9 rounds of 357 in the tube and 1 chambered, so 10 rds of 357 loaded with a 165gr SWCGC and 14.5gr of LilGun, talk about a potent, potent little, light package.... I cant help but liking it alot.
In fact I like it enough to buy another rossi, this time a 20" in 454Casull and I can only hope it is as nice as this one has proven to be.
16" blued model that Ive completely disassembled and smoothed the action and all associated parts inside, smoothed the loading port, worked the trigger and sear, narrowed the loading gate cover "spring", hand lapped the bore with a lead slug(s), removed and stripped the wood restained it and refinished with tru-oil. Changed out the main and ejector springs, added a SS follower, modified the rear buckhorn and added a Dawson FO front. Finally I lightly polished all the blued metal with a light touch of Flitz. I havent changed the mag spring yet, I have a new SS one but didnt install it yet because the original is performing fine so far. I did trim it a little but probably not as much as most do.
Ive only had this sweetie for about 5 months and already put well over 4000 rds through it and other than a few 357 rounds that I loaded a bit long with a marginal bullet Ive not had a single issue with this great little trapper. I mean Im really impressed by it. Accuracy is simply outstanding with just about everything Ive loaded. Granted, the loads mostly are known(to me) to be pretty accurate in most firearms and performed just as good in the rossi. I was a bit hesitant to wager my money on a rossi and Ive been kicking myself in the butt now for now doing it sooner re: cheaper.
To top all of this off this sample will hold 9 rounds of 357 in the tube and 1 chambered, so 10 rds of 357 loaded with a 165gr SWCGC and 14.5gr of LilGun, talk about a potent, potent little, light package.... I cant help but liking it alot.
In fact I like it enough to buy another rossi, this time a 20" in 454Casull and I can only hope it is as nice as this one has proven to be.