New to reloading .38Special and .357Mag
-
- Posts: 11
- Joined: 28 Feb 2019 06:22
- Location: Melbourne, Australia
- Has thanked: 2 times
- Been thanked: 3 times
Re: New to reloading .38Special and .357Mag
Sorry I hope not to sound stupid as this is my first time with straight neck cases, all of my previous reloading was for .308, .223 and .260. When you say "I have to bell the case mouth a little more" what does that mean exactly?
The cases I just reloaded were prepared by a friend and I have to admit seating them was awkward but I did not see anything different about the case mouth. If I can "Bell" them out a little that would definitely help with seating them.
I picked up a 3 Die RCBS set of dies second hand with 3 different seaters for the seater die. Also included was a LEE Factory Crimp die which I used to crimp them a little after seating them with the seating die. I should also add I have more .38 Special cases than .357 at the moment and I noticed the .357 seating Die wasn't crimping the .38 stuff like it was the .357 so thought using the Lee crimp die was for the .38 and used it on them.
So I am assuming one of the RCBS dies will "Bell" the mouth a little making it easier to reload with? The Hard Cast Bullets I bought are all flat base so yeah it really wasn't easy seating them and was thinking there must be an easier way.
The cases I just reloaded were prepared by a friend and I have to admit seating them was awkward but I did not see anything different about the case mouth. If I can "Bell" them out a little that would definitely help with seating them.
I picked up a 3 Die RCBS set of dies second hand with 3 different seaters for the seater die. Also included was a LEE Factory Crimp die which I used to crimp them a little after seating them with the seating die. I should also add I have more .38 Special cases than .357 at the moment and I noticed the .357 seating Die wasn't crimping the .38 stuff like it was the .357 so thought using the Lee crimp die was for the .38 and used it on them.
So I am assuming one of the RCBS dies will "Bell" the mouth a little making it easier to reload with? The Hard Cast Bullets I bought are all flat base so yeah it really wasn't easy seating them and was thinking there must be an easier way.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
Re: New to reloading .38Special and .357Mag
I've always called it flaring but belling works to. I'm unsure of technical details. I think it helps to seat certain bullets in the cases especially big bullets.
-
- Posts: 11
- Joined: 28 Feb 2019 06:22
- Location: Melbourne, Australia
- Has thanked: 2 times
- Been thanked: 3 times
Re: New to reloading .38Special and .357Mag
Yep definitely, I took the primer pin out of the die temporary as I had already put new primers into the cases, I ran them through the die and put a very slight flare on the case necks and they seated very very easily. After I was done I ran them through the LEE Factory Crimp Die and they look fantastic. Tomorrow will tell as I am off to the range in the morning
Once again thank you everyone, so glad I found these forums
Once again thank you everyone, so glad I found these forums
- GasGuzzler
- Moderator
- Posts: 2755
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: New to reloading .38Special and .357Mag
Lee uses a "powder-through expanding die" to flare or bell the mouth on straight wall cases.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
-
- Posts: 69
- Joined: 10 Apr 2012 12:13
- Location: Orygun
- Has thanked: 9 times
- Been thanked: 26 times
Re: New to reloading .38Special and .357Mag
Off Topic
When you say "I have to bell the case mouth a little more" what does that mean exactly?
When someone suggests "...bell the case a little more", they are suggesting making the entry way in the case mouth larger so the bullet enters the case easier, with no shaving...
I can't remember about my 38/357 dies, but my 45 Colt dies by RCBS does have a dedicated "flaring die". Some use Lyman's "M" die to slightly expand a section of the case at the mouth and add a fit of flare. Very good die. My Lee dies have a "powder through" die that is designed to flare and provide a funnel for powder charging simultaneously.
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: New to reloading .38Special and .357Mag
Al of my RCBS 3 die pistol set have a sizer/decap die, a dedicated expander and a seater with one or more stems.
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
-
- Posts: 11
- Joined: 28 Feb 2019 06:22
- Location: Melbourne, Australia
- Has thanked: 2 times
- Been thanked: 3 times
Re: New to reloading .38Special and .357Mag
Okay, thanks got it working fine now, this last 50 I reloaded were so much easier now that I flared the case. I actually am just back from the range having shot a bit to run the new Rifle in, great fun, I am absolutely in love with my new Rossi 92.
Going to get the spring and metal follower kit and work on polishing everything that needs to be done to make life even better:)
Cannot wait to get back out there with her!
Cannot thank everyone enough for the help I have been given here, you have all contributed to making me a very happy shooter
Going to get the spring and metal follower kit and work on polishing everything that needs to be done to make life even better:)
Cannot wait to get back out there with her!
Cannot thank everyone enough for the help I have been given here, you have all contributed to making me a very happy shooter
-
- Posts: 69
- Joined: 10 Apr 2012 12:13
- Location: Orygun
- Has thanked: 9 times
- Been thanked: 26 times
Re: New to reloading .38Special and .357Mag
Yep, one of my "keep forever" favorite guns is my Puma/Rossi 92. Mine is in 44 Mag. and I have no idea how many rounds have bee shot through it since '95. I had to put a Williams receiver sight and taller front sight because my 62 year old eyes don't see sights very good anymore (that was 10 years ago and I'm still shooting her)...
-
- Posts: 75
- Joined: 27 Jun 2015 23:52
- Location: Idaho
- Has thanked: 2 times
- Been thanked: 14 times
Re: New to reloading .38Special and .357Mag
Marksman75,
One more thing you asked about earlier that I don't see addressed yet is the 357 mag dies not crimping the 38 special cases. You may know this, but you have to set the dies up differently for 357 mag vs. 38 special. I'd have to read my instructions again, but for 38 special you turn the dies in almost 2 turns more to reach the shorter case mouth.
I usually put an empty case in the shell holder and run it up all the way without a seating die in the press. Then I put the seating die in and turn it down until I can just feel it bottom out on the shell. I lower the press ram down, turn the die in about 1/8 turn further down, and lock it down. Then I adjust as need for the first few round loaded until everything looks right.
Of course the bullet depth has to be adjusted every time you adjust the die position for crimp as well.
One more thing you asked about earlier that I don't see addressed yet is the 357 mag dies not crimping the 38 special cases. You may know this, but you have to set the dies up differently for 357 mag vs. 38 special. I'd have to read my instructions again, but for 38 special you turn the dies in almost 2 turns more to reach the shorter case mouth.
I usually put an empty case in the shell holder and run it up all the way without a seating die in the press. Then I put the seating die in and turn it down until I can just feel it bottom out on the shell. I lower the press ram down, turn the die in about 1/8 turn further down, and lock it down. Then I adjust as need for the first few round loaded until everything looks right.
Of course the bullet depth has to be adjusted every time you adjust the die position for crimp as well.
-
- Posts: 69
- Joined: 10 Apr 2012 12:13
- Location: Orygun
- Has thanked: 9 times
- Been thanked: 26 times
Re: New to reloading .38Special and .357Mag
Yep, when I first started reloading I counted "turns beyond touching" for my crimp when I recorded the load, so I could duplicate the ammo next time...Iplayfarmer wrote:Marksman75,
One more thing you asked about earlier that I don't see addressed yet is the 357 mag dies not crimping the 38 special cases. You may know this, but you have to set the dies up differently for 357 mag vs. 38 special. I'd have to read my instructions again, but for 38 special you turn the dies in almost 2 turns more to reach the shorter case mouth.
I usually put an empty case in the shell holder and run it up all the way without a seating die in the press. Then I put the seating die in and turn it down until I can just feel it bottom out on the shell. I lower the press ram down, turn the die in about 1/8 turn further down, and lock it down. Then I adjust as need for the first few round loaded until everything looks right.
Of course the bullet depth has to be adjusted every time you adjust the die position for crimp as well.