Page 1 of 1
Fore Stock removal ?
Posted: 28 May 2017 16:24
by Old Vagabond
Ok...I have been trying to remove the fore-stock on my CJ, and have the manual. I have removed the stock screw and opened the cylinder as per instructions. I have pulled and pried but cannot get it off. What am I doing wrong?
Thanks
Re: Fore Stock removal ?
Posted: 28 May 2017 18:17
by GRV01
Old Vagabond wrote: What am I doing wrong?
Thanks
not hitting it hard enough!
but seriously, have you tried a rubber mallet? I often have to use that to get the stock off during cleanings on my 92s
Re: Fore Stock removal ?
Posted: 17 Aug 2017 03:32
by Oz judge
There are two forend screws , there are two crudely welded on threaded bits of round tube, they may not be welded square so it may need a bit of tapping & prying but it will come.
Re: Fore Stock removal ?
Posted: 17 Aug 2017 03:33
by Oz judge
One screw is the sling swivel .