Since removing the Skinner Peep Sight I have several tapped holes in the barrel.
I have smaller and larger in my "catch all" drawer but none the correct size.
Anyone know the thread size for these so I can cap them ?
I know, I know, I can buy them from Steve or Skinner but for the shipping charges
I figured I could get some locally more reasonably.
Anyone ?
Jim
Set Screws ?
- Jaybm
- 500 Shots
- Posts: 739
- Joined: 09 May 2014 17:15
- Location: SC
- Has thanked: 118 times
- Been thanked: 139 times
Re: Set Screws ?
Aha ... 6/48 from another thread !
Thanks RD.
Jim
Thanks RD.
Jim
Gun Control Means Hitting The Target
- Jaybm
- 500 Shots
- Posts: 739
- Joined: 09 May 2014 17:15
- Location: SC
- Has thanked: 118 times
- Been thanked: 139 times
Re: Set Screws ?
Update.
None of the local resources had them. Kept trying to sell me 6/32
Ordered from Midway USA and they are en-route.
Jim
None of the local resources had them. Kept trying to sell me 6/32
Ordered from Midway USA and they are en-route.
Jim
Gun Control Means Hitting The Target
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
- Jaybm
- 500 Shots
- Posts: 739
- Joined: 09 May 2014 17:15
- Location: SC
- Has thanked: 118 times
- Been thanked: 139 times
Re: Set Screws ?
Arrived today. great big envelope with a little zip lock baggie inside.
At first I thought they left out the screws but the pkg of ten was in
there.
Darn those things are small ! Dropped three of them before I got one
started. Luckily I found them. Finally resorted to using a tweezers to
hold the screw at the threaded hole. Now I think of magnetizing the
screwdriver blade !
Even at 1/8 inch length they bottomed out before they were flush.
Suppose I'll have to be satisfied that the holes are filled.
Jim
At first I thought they left out the screws but the pkg of ten was in
there.
Darn those things are small ! Dropped three of them before I got one
started. Luckily I found them. Finally resorted to using a tweezers to
hold the screw at the threaded hole. Now I think of magnetizing the
screwdriver blade !
Even at 1/8 inch length they bottomed out before they were flush.
Suppose I'll have to be satisfied that the holes are filled.
Jim
Gun Control Means Hitting The Target