Revolver powders
Re: Revolver powders
For now I only reload for one revolver caliber, and that's .45 Colt, and for that I use Trail Boss.
Am I paranoid? Nope, I'm heavily armed!
- GasGuzzler
- Moderator
- Posts: 2757
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: Revolver powders
In that case it is impossible to have an overload, book load or not.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
- mr surveyor
- 1000 Shots
- Posts: 1611
- Joined: 16 Mar 2013 11:20
- Location: NE Texas
- Has thanked: 490 times
- Been thanked: 294 times
Re: Revolver powders
GasGuzzler wrote:In that case it is impossible to have an overload, book load or not.
.... unless you compress the TB and crush the powder ....
jd
-----------------------------------------------------------------------------------------
Guns - They aren't really yours until you void the warranty!
Guns - They aren't really yours until you void the warranty!
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Revolver powders
In the 45 Colt I use TB for my fooling around load and H110 and Lil'Gun for the serious stuff. I want to work up some TB loads for the 44 Magnum rifle I don't shoot the Contender that much any more.
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Revolver powders
Some body will always find a way.GasGuzzler wrote:In that case it is impossible to have an overload, book load or not.
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
- mr surveyor
- 1000 Shots
- Posts: 1611
- Joined: 16 Mar 2013 11:20
- Location: NE Texas
- Has thanked: 490 times
- Been thanked: 294 times
Re: Revolver powders
Ohio3Wheels wrote:In the 45 Colt I use TB for my fooling around load and H110 and Lil'Gun for the serious stuff. I want to work up some TB loads for the 44 Magnum rifle I don't shoot the Contender that much any more.
Make smoke,
I've found that 6.5 - 7.0 gr of Trail Boss work well in my 20" R92 44 mag, and worked well in my formerly owned Ruger Super Red Hawk. Depending on bullet profile I think the 7.0 gr is near (just not quite) the max load to avoid compressing/crushing the powder and possibly having an undesired event while shooting. It's a very manageable, lower velocity load.
jd
-----------------------------------------------------------------------------------------
Guns - They aren't really yours until you void the warranty!
Guns - They aren't really yours until you void the warranty!
Re: Revolver powders
I'm using 7.0gr of Titegroup in my .357 using a 125gr. CJHP
Just a side note :
I saw someone's post in here revolver vs. rifle as far as powders and velocity. In order to get a closer number to find out what the velocity is using revolver load in a rifle is , when working a load using say hodgons load data , they give a working load barrel length at the top of the load data. Rule of thumb is adding 40fps per inch of barrel .
Just a side note :
I saw someone's post in here revolver vs. rifle as far as powders and velocity. In order to get a closer number to find out what the velocity is using revolver load in a rifle is , when working a load using say hodgons load data , they give a working load barrel length at the top of the load data. Rule of thumb is adding 40fps per inch of barrel .
Re: Revolver powders
Ohio, what sort of True Blue loads are you using..?Ohio3Wheels wrote:I load for both the 357 and the 45 Colt for both the Rossi '92s and the two Black Hawks and I tend to shoot close to the same loads in both although I tend to back off a little on the revolver loads vs the rifles. Arthritis in the hand and wrist will only stand for so much pounding. For hunting H110, LilGun and 296 with heavy bullets. For fun lighter bullets and either True Blue or Trail Boss. Follow one or two good manuals and have fun.
Make smoke,
I'm looking for paper-punching loads in my .45LC R92, and just bought a tub of True Blue to try... I'm currently using Ramshot Zip, its accuracy is ok, but I think that powder is a little fast for a 20'' carbine, and the slower powder my be better..??
I'll be using 250gn RNFP lead...
thanks,
Daryll.