ideas on replacing leaf sight for flip down style/more
- alphalimafoxtrot
- Posts: 249
- Joined: 15 Dec 2015 05:16
- Location: Alexandria Virginia
- Has thanked: 378 times
- Been thanked: 59 times
ideas on replacing leaf sight for flip down style/more
Hey guys -
I'm wanting to swap out the stock iron sights on my 16" .357 Rossi 92 for something a little more helpful for snap shooting, as well as deliberate/focused target shooting.
To that end I had thought following the usual practice along the lines of replacing the rear sliding leaf with a flip down rear sight, and later on getting a tang peep sight for the fine-tuned aimed shots.
Then, I asked myself - should I even bother with the tang sight on such a short-barreled carbine? I like how that setup would look, with a folding tang and flip-down up front. I don't know, maybe I just want some reassurance that the tang site on a short barreled carbine is not a waste of time/money. I'm never putting a scope on the gun, it is purely a fun/functional shooter to take to the range and for HD. I won't be putting a laser on it either, just keep it old-school.
I did read a few bad reviews of Marble's #95 folding rear sight, in terms of durability. Apparently the adjuster screw breaks pretty easily. However, same can be said of the original or older generation folding sights too.
Things to wonder about while my rotator cuff is healing! It's a worthwhile distraction to focus on my gun hobby, I think.
Adam
I'm wanting to swap out the stock iron sights on my 16" .357 Rossi 92 for something a little more helpful for snap shooting, as well as deliberate/focused target shooting.
To that end I had thought following the usual practice along the lines of replacing the rear sliding leaf with a flip down rear sight, and later on getting a tang peep sight for the fine-tuned aimed shots.
Then, I asked myself - should I even bother with the tang sight on such a short-barreled carbine? I like how that setup would look, with a folding tang and flip-down up front. I don't know, maybe I just want some reassurance that the tang site on a short barreled carbine is not a waste of time/money. I'm never putting a scope on the gun, it is purely a fun/functional shooter to take to the range and for HD. I won't be putting a laser on it either, just keep it old-school.
I did read a few bad reviews of Marble's #95 folding rear sight, in terms of durability. Apparently the adjuster screw breaks pretty easily. However, same can be said of the original or older generation folding sights too.
Things to wonder about while my rotator cuff is healing! It's a worthwhile distraction to focus on my gun hobby, I think.
Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: ideas on replacing leaf sight for flip down style/more
I like my Marbles tang it's on a 20 inch octagonal so no help about a 16. It does make precision possible not so much snap shots. Thinking about taking the eye cup out and trying as a ghost ring for faster pick up.
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
- HarryAlonzo
- 500 Shots
- Posts: 990
- Joined: 31 Dec 2015 00:20
- Location: Sedona
- Has thanked: 248 times
- Been thanked: 283 times
Re: ideas on replacing leaf sight for flip down style/more
That combination is intriguing. How's about a Lyman #16 for the folding rear, and a Skinner receiver? I like my Marbles tang, and I trust it out to 100 yards. I don't think it's wasted on a 16 inch barrel at all.
- Mad Trapper
- 500 Shots
- Posts: 542
- Joined: 03 Aug 2013 14:04
- Location: Daniel Boone Forest
- Has thanked: 172 times
- Been thanked: 144 times
Re: ideas on replacing leaf sight for flip down style/more
I installed a folding ladder on one of my 16" rossi 92s.
I need to take a better pic, dont know if it can be seen real good.
https://www.brownells.com/rifle-parts/s ... 30999.aspx
I installed this marble bullseye on another, but not used it yet.
https://www.brownells.com/rifle-parts/s ... 05965.aspx
I need to take a better pic, dont know if it can be seen real good.
https://www.brownells.com/rifle-parts/s ... 30999.aspx
I installed this marble bullseye on another, but not used it yet.
https://www.brownells.com/rifle-parts/s ... 05965.aspx
Re: ideas on replacing leaf sight for flip down style/more
I installed the Marble Bullseye as shown above. Unfortunately, it just didn't work with my contacts....only with reading glasses and it was pretty good. But I was then having a harder time seeing the target. My son with good eyesight had no problem hitting the 300 yard steel gong. I think it's design makes it both fast on target and precise for accurate shots.
-
- 250 Shots
- Posts: 452
- Joined: 19 Oct 2015 01:32
- Location: Colorado
- Has thanked: 181 times
- Been thanked: 142 times
Re: ideas on replacing leaf sight for flip down style/more
What about the peep from Steve's Gunz that replaces the safety? Seems like that would be ideal for a shorty carbine.
- HarryAlonzo
- 500 Shots
- Posts: 990
- Joined: 31 Dec 2015 00:20
- Location: Sedona
- Has thanked: 248 times
- Been thanked: 283 times
Re: ideas on replacing leaf sight for flip down style/more
I had the Steve's Gunz peep for awhile, and I liked that it was compact and low. But if you're looking for precision, you can do better. Elevation adjustment is by 180 degree turns, and the bolt is not the most stable or repeatable base for a sight.
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: ideas on replacing leaf sight for flip down style/more
Exactly why I didn't wind up buying one.HarryAlonzo wrote:I had the Steve's Gunz peep for awhile, and I liked that it was compact and low. But if you're looking for precision, you can do better. Elevation adjustment is by 180 degree turns, and the bolt is not the most stable or repeatable base for a sight.
- alphalimafoxtrot
- Posts: 249
- Joined: 15 Dec 2015 05:16
- Location: Alexandria Virginia
- Has thanked: 378 times
- Been thanked: 59 times
Re: ideas on replacing leaf sight for flip down style/more
OP here - still typing almost completely one handed - day 5 post-op.
Arm's progressing as they told me it should, tomorrow AM I have my 1st follow-up with my ortho.
FWIW on the rotator cuff repair Fujita scale, mine is labeled as LARGE TO MASSIVE SIZED ROTATOR CUFF REPAIR + BICEPS TENODESIS. Which is as far as you go before shoulder replacement.
None of this stuff is new to 90% of you guys, young or old, here on the forum...
So where was I? Oh yeah - replacing sights on my 16" Rossi 92 .357!
I won't be going the Steve's Gunz bolt safety route - for the reasons you already mentioned, as well as I plan on just leaving the safety alone to just remove/plug up in the far future.
I do like the Marble's bullseye sight setup - looks good, and reviews seem positive!
OK just took me a year to compose this, so I gotta take a break. Be well, 'yall! And thanks for all the productive comments!
Adam
Arm's progressing as they told me it should, tomorrow AM I have my 1st follow-up with my ortho.
FWIW on the rotator cuff repair Fujita scale, mine is labeled as LARGE TO MASSIVE SIZED ROTATOR CUFF REPAIR + BICEPS TENODESIS. Which is as far as you go before shoulder replacement.
None of this stuff is new to 90% of you guys, young or old, here on the forum...
So where was I? Oh yeah - replacing sights on my 16" Rossi 92 .357!
I won't be going the Steve's Gunz bolt safety route - for the reasons you already mentioned, as well as I plan on just leaving the safety alone to just remove/plug up in the far future.
I do like the Marble's bullseye sight setup - looks good, and reviews seem positive!
OK just took me a year to compose this, so I gotta take a break. Be well, 'yall! And thanks for all the productive comments!
Adam
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
- GasGuzzler
- Moderator
- Posts: 2756
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: ideas on replacing leaf sight for flip down style/more
You remind me of me after my only surgery. I was online the whole time I wasn't asleep.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.