how difficult is it to install a 3/4 size big loop lever?
-
- Posts: 108
- Joined: 15 May 2018 21:38
- Location: MN
- Has thanked: 76 times
- Been thanked: 35 times
how difficult is it to install a 3/4 size big loop lever?
got it, thanks
Last edited by stevep1954 on 02 Jun 2018 11:05, edited 1 time in total.
- GasGuzzler
- Moderator
- Posts: 2757
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: how difficult is it to install a 3/4 size big loop lever
Find the process on youtube. It's more than two screws on a model 92.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: how difficult is it to install a 3/4 size big loop lever
Yeah, got to pull it all apart as the lever is pinned through the bolt.GasGuzzler wrote:Find the process on youtube. It's more than two screws on a model 92.
Michael
-
- Posts: 108
- Joined: 15 May 2018 21:38
- Location: MN
- Has thanked: 76 times
- Been thanked: 35 times
Re: how difficult is it to install a 3/4 size big loop lever
i received the lever from Steve and am in the process of installing it. i have a few emails sent to Steve for help with the installation but all told it is pretty easy so far.
-
- Posts: 108
- Joined: 15 May 2018 21:38
- Location: MN
- Has thanked: 76 times
- Been thanked: 35 times
Re: how difficult is it to install a 3/4 size big loop lever
i got it installed and it works great. Steve is a BIG help!
- GasGuzzler
- Moderator
- Posts: 2757
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 453 times
Re: how difficult is it to install a 3/4 size big loop lever
Good job
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
-
- Posts: 108
- Joined: 15 May 2018 21:38
- Location: MN
- Has thanked: 76 times
- Been thanked: 35 times
Re: how difficult is it to install a 3/4 size big loop lever
as a follow up, i did have problems with the cartridges chambering and after i asked Steve (Gunz) he thought i needed to take a bit more metal off the part that engages the lifter. he also suggested pinning the two levers together and looking for the differences. after we talked i did notice that the new lever didn't open quite as far as the old one. it was not getting that last push to get the round up to loading height. i'll add a pic to show what i mean. thanks again Steve Gunz! the 3/4 lever he sells is beautiful and well worth the investment.