Factory Grip Panel Refinish

Share your experience in caring for your favorite Rossi with other members or ask the question that you cannot find the answer to!
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Factory Grip Panel Refinish

Post by GasGuzzler »

As mentioned in the rifle/pistol combo topic I am going to match some factory Blackhawk grips to my SRC stock color. Here's the start. Got some untouched factory grips from the early 1980's.

I'll try to take pics as I go.

Image
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: Factory Grip Panel Refinish

Post by akuser47 »

Cool I always like to see if I can learn from others technique in stock finishes. +corn
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
Archer
2000 Shots
2000 Shots
Posts: 3942
Joined: 04 Feb 2014 05:30
Location: SoCal Loco
Has thanked: 137 times
Been thanked: 610 times

Re: Factory Grip Panel Refinish

Post by Archer »

Those don't exactly look like they matched to start with...
Could be lighting or a previous user might have been left handed?
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: Factory Grip Panel Refinish

Post by akuser47 »

I think they are 2 different guns sides as most handgun grips like theses I thought were cut from a single piece then shaped so they'd have same grain pattern I believe. I don't know though. I'm always learning. +corn
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Re: Factory Grip Panel Refinish

Post by GasGuzzler »

Ruger is not consistent in wood finish after the early 70's.

They could be from different guns or from the same. When I'm done (and they're mounted on each side of a grip frame), they'll match well enough.

They look closer in person too.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: Factory Grip Panel Refinish

Post by akuser47 »

I have no doubt you'll get them matched up. I anticipate your process and the end results. +corn
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
Archer
2000 Shots
2000 Shots
Posts: 3942
Joined: 04 Feb 2014 05:30
Location: SoCal Loco
Has thanked: 137 times
Been thanked: 610 times

Re: Factory Grip Panel Refinish

Post by Archer »

akuser47 wrote:I think they are 2 different guns sides as most handgun grips like theses I thought were cut from a single piece then shaped so they'd have same grain pattern I believe. I don't know though. I'm always learning. +corn
I've seen the same block have different colors and the grain not match side to side. I've got an old Garand stock that does this, dark on one side light on the other. Even if the block matches before milling the wood density may take stain or even varnishes differently resulting in a different appearance than expected.
Then there's the possibility that one grip side has a flaw that makes it less than acceptable, a crack or a void or something revealed in the machining while the other side is fine. Those mixed parts can be assembled into pairs and may be sold as seconds or blems or used on contract guns where the appearance takes second place to price.

There used to be a vendor on the net who was pretty reasonable at a site called pic-a-grip.com he used to sell Spiegel and Ahrends grips. The Spiegel grips in particular would vary in price with how well the color and grain patterns matched side to side. A set of BHP grips that didn't much match might be $35 or so while a premium match would be running $75 or $80.
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Re: Factory Grip Panel Refinish

Post by GasGuzzler »

The grain sort of matches on the heel....?

I gave $20 for the pair shipped (vintage unused take offs) so the price is low for what they sell for....a lot less than the walnut Old Model grips I had to buy to correct my 1965 Single Six.

Next step is medallion removal followed by finish removal. I'll evaluate the wood then.

I've done a few sets of XR3-RED and the new version as well as several Ruger-mud "hardwood" (after they stopped using walnut) stocks for various friends and eBay buyers. Everyone has been happy....including one guy that lost the stock I sent for years but found it in the box it was mailed in.

He owes me a pic with his old action sitting in it. Maybe he'll post a pic.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
GasGuzzler
Moderator
Moderator
Posts: 2745
Joined: 02 Nov 2015 19:54
Location: Cooke County, TX
Has thanked: 310 times
Been thanked: 451 times

Re: Factory Grip Panel Refinish

Post by GasGuzzler »

Drill out just a tiny portion of the flare on the backside of the medallion.

Image

Push the medallions off with a small punch and smith hammer.

Image

Carefully remove the ferrule and nut.

Image

Fill the four cavities with candle wax. This keeps the sludge from the finish stripping process from plugging up the machined cavities.

Image

Image

Next I'll strip the finish but for now I'm out of all the chemicals I use.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
akuser47
Founding Member
Founding Member
Posts: 5070
Joined: 12 Feb 2012 11:43
Location: ohio
Has thanked: 1266 times
Been thanked: 482 times

Re: Factory Grip Panel Refinish

Post by akuser47 »

Nice your going to have me hunting grips for my vaquero to refinish now.
Image
Live Free,Ride Free, Or Die Fighting, For The Right, To do So!
Post Reply