Hello from Monroe Ohio
Hello from Monroe Ohio
Found this forum and thought it looked like a good place to learn more about the Rossi from those that like and know the rifle. I am a NRA life member, enjoy hunting and target shooting. I am a USAF Veteran, Air Weather Service Equipment Repair, 1963 to 1967.
Been looking for a Rossi R92-51203 to go with my S&W 586 for Hog hunting. At this point in time I wonder if Rossi is still going to produce this model. I have contacted Rossi USA and cannot get a straight answer from them as to an approximate date when it will be available again or if it is in production or when it will be. I might go for a round barrel if I was sure the octagon would no longer be made.
Looking forward to meeting and chatting with you all.
Been looking for a Rossi R92-51203 to go with my S&W 586 for Hog hunting. At this point in time I wonder if Rossi is still going to produce this model. I have contacted Rossi USA and cannot get a straight answer from them as to an approximate date when it will be available again or if it is in production or when it will be. I might go for a round barrel if I was sure the octagon would no longer be made.
Looking forward to meeting and chatting with you all.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Hello from Monroe Ohio
Welcome to the forum and thank you for your service.
Kind of hard to know what Rossi is up to these days as far as the various models go. Of course a hog will not be able to tell which barrel whacked him!
Kind of hard to know what Rossi is up to these days as far as the various models go. Of course a hog will not be able to tell which barrel whacked him!
Michael
- zippy
- 250 Shots
- Posts: 416
- Joined: 05 Mar 2015 20:34
- Location: Upstate South Carolina
- Has thanked: 103 times
- Been thanked: 103 times
Re: Hello from Monroe Ohio
Howdy from South Carolina, and welcome to the forum.
I did a quick search of my usual places, and didn't find that one. You might want to call Steve's Gunz to see if he has one.
http://store.stevesgunz.com/index.php?m ... ucts_id=10
I did a quick search of my usual places, and didn't find that one. You might want to call Steve's Gunz to see if he has one.
http://store.stevesgunz.com/index.php?m ... ucts_id=10
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
Re: Hello from Monroe Ohio
Welcome, and thank you sir for your service. Glad to see more Buckeyes sprouting in this forum.
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Hello from Monroe Ohio
Welcome from just up the road in Dayton.
Make smoke,
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: Hello from Monroe Ohio
Welcome,
Good luck with the Octagonal. That's a pretty one but a couple lbs over the 20" round barrel.
I always thought I wanted to go that route and I've got the SS .44 24" Oct and I'm quite happy with it but find the 20" RB to be much more handy in both the .44 Mag and the .357/.38. The 20" Octagonal might split the difference.
I MIGHT pick up a .357 Octagonal but at the moment, even though I've already got the 20" blue RB in that caliber I'd probably go for the 20" RB SS as my next choice.
Good luck with the Octagonal. That's a pretty one but a couple lbs over the 20" round barrel.
I always thought I wanted to go that route and I've got the SS .44 24" Oct and I'm quite happy with it but find the 20" RB to be much more handy in both the .44 Mag and the .357/.38. The 20" Octagonal might split the difference.
I MIGHT pick up a .357 Octagonal but at the moment, even though I've already got the 20" blue RB in that caliber I'd probably go for the 20" RB SS as my next choice.
- HarryAlonzo
- 500 Shots
- Posts: 995
- Joined: 31 Dec 2015 00:20
- Location: Sedona
- Has thanked: 250 times
- Been thanked: 285 times
Re: Hello from Monroe Ohio
Welcome!
The octagonal barrel does limit your optics options.
What's your bullet preference for feral hogs? I'm partial to a soft nose, but I've heard good arguments for semi-wadcutters and hollow points.
The octagonal barrel does limit your optics options.
What's your bullet preference for feral hogs? I'm partial to a soft nose, but I've heard good arguments for semi-wadcutters and hollow points.
Re: Hello from Monroe Ohio
Thanks to all for the welcome. Ran across a 24" octagon Blue frame Taurus/Rossi model R92-5100' Too nice to pass up. Haven't been able to shoot it yet but the more I handle it the more I like it. Just might have to own two, one blue 24" for open country long shots and one Casehardened 20" for close work.
I have even entertained the Idea of taking the Casehardened 20" to a good gun smith when I get it and having the barrel cut to 18" If anyone knows of a gun smith able to do that type work within a couple hours of Cincinnati, please let me know.
I haven't hunted them yet (want to go when it cools down this fall) but My preference for a hog load is the 180 Grain Swift A-Frame slug (Federal Vital-Shok Swift A-Frame .357 Mag 180 Grain for a factory load). In the 80's I hand loaded 180 gr. soft points for bowling pin matches using my S&W 6" 686. If I did my part correctly it did it's part.
Ohio3Wheels, We will have to meet for coffee some time. It will have to be July or later as I am tied up for the month of June.
I have even entertained the Idea of taking the Casehardened 20" to a good gun smith when I get it and having the barrel cut to 18" If anyone knows of a gun smith able to do that type work within a couple hours of Cincinnati, please let me know.
I haven't hunted them yet (want to go when it cools down this fall) but My preference for a hog load is the 180 Grain Swift A-Frame slug (Federal Vital-Shok Swift A-Frame .357 Mag 180 Grain for a factory load). In the 80's I hand loaded 180 gr. soft points for bowling pin matches using my S&W 6" 686. If I did my part correctly it did it's part.
Ohio3Wheels, We will have to meet for coffee some time. It will have to be July or later as I am tied up for the month of June.
-
- 1000 Shots
- Posts: 1599
- Joined: 31 Jul 2014 15:18
- Location: Dayton Oh
- Has thanked: 227 times
- Been thanked: 328 times
Re: Hello from Monroe Ohio
Sounds like a possibility and I might just be out from under all the non-shooting stuff by late July. Commitment to dog club events keep my schedule full June and July. Still sneak out to the range now and then.TheKeeper wrote: Ohio3Wheels, We will have to meet for coffee some time. It will have to be July or later as I am tied up for the month of June.
Make smoke,
Curt... makin' smoke and raising my carbon foot print one cartridge at a time