Lightening 92 hammer spring
Lightening 92 hammer spring
I thought there was supposed to be instructions on Steve's DVD for modifying the hammer spring to lighten it up a bit. I can't seem to find it. Was I told wrong?
- jamesgpobog
- Posts: 114
- Joined: 03 Dec 2013 13:40
- Location: SoCal
- Has thanked: 5 times
- Been thanked: 13 times
Re: Lightening 92 hammer spring
I can't speak to that, but I just went to a solid hardware store with a good selection of springs and made a choice close to the same length and a slightly smaller wire gage. Just cost a few cents.
Si vis pacem, para bellum.
-
- 2000 Shots
- Posts: 3942
- Joined: 04 Feb 2014 05:30
- Location: SoCal Loco
- Has thanked: 137 times
- Been thanked: 610 times
Re: Lightening 92 hammer spring
It is on the DVD.
IF I recall correctly he says you CAN trim UP TO 4 coils off pre-safety guns
and UP TO 2 coils CAN be trimmed of guns with the safety.
Remember you can't put metal back on springs too easy and YOU are trimming at your own risk.
IF I recall correctly he says you CAN trim UP TO 4 coils off pre-safety guns
and UP TO 2 coils CAN be trimmed of guns with the safety.
Remember you can't put metal back on springs too easy and YOU are trimming at your own risk.