how difficult is it to install a 3/4 size big loop lever?
Posted: 29 May 2018 20:17
got it, thanks
Rossi Rifleman
The Forum for the Rossi Enthusiast! This site is not associated with RossiUSA/Braztech nor is RossiUSA/Braztech responsible for this site's content.
http://rossi-rifleman.com/
how difficult is it to install a 3/4 size big loop lever?
Page 1 of 1
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 30 May 2018 06:30
Find the process on youtube. It's more than two screws on a model 92.
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 03 Jun 2018 08:13
Yeah, got to pull it all apart as the lever is pinned through the bolt.GasGuzzler wrote:Find the process on youtube. It's more than two screws on a model 92.
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 04 Jun 2018 19:27
i received the lever from Steve and am in the process of installing it. i have a few emails sent to Steve for help with the installation but all told it is pretty easy so far.
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 05 Jun 2018 13:45
i got it installed and it works great. Steve is a BIG help!
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 05 Jun 2018 17:07
Good job
Re: how difficult is it to install a 3/4 size big loop lever
Posted: 11 Jun 2018 07:59
as a follow up, i did have problems with the cartridges chambering and after i asked Steve (Gunz) he thought i needed to take a bit more metal off the part that engages the lifter. he also suggested pinning the two levers together and looking for the differences. after we talked i did notice that the new lever didn't open quite as far as the old one. it was not getting that last push to get the round up to loading height. i'll add a pic to show what i mean. thanks again Steve Gunz! the 3/4 lever he sells is beautiful and well worth the investment.
