how difficult is it to install a 3/4 size big loop lever?

The Rossi Model R92, a lightweight carbine for Cowboy Action, hunting, or plinking! Includes Rossi manufactured Interarms, Navy Arms, and Puma trade names.

how difficult is it to install a 3/4 size big loop lever?

Postby stevep1954 » 29 May 2018 20

got it, thanks
Last edited by stevep1954 on 02 Jun 2018 11, edited 1 time in total.
stevep1954
Supporter
Supporter
 
Posts: 12
Joined: 15 May 2018
Has thanked: 1 time
Been thanked: 6 times
My Rossi Choice: M92
Location: MN

Re: how difficult is it to install a 3/4 size big loop lever

Postby GasGuzzler » 30 May 2018 06

Find the process on youtube. It's more than two screws on a model 92.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
GasGuzzler
Supporter
Supporter
 
Posts: 1910
Joined: 02 Nov 2015
Has thanked: 140 times
Been thanked: 211 times
My Rossi Choice: Revolver
Location: Cooke County, TX

Re: how difficult is it to install a 3/4 size big loop lever

Postby Ranch Dog » 03 Jun 2018 08

GasGuzzler wrote:Find the process on youtube. It's more than two screws on a model 92.

Yeah, got to pull it all apart as the lever is pinned through the bolt.
Michael
Image
User avatar
Ranch Dog
Site Admin
Site Admin
 
Posts: 8663
Joined: 23 Jan 2012
Has thanked: 1435 times
Been thanked: 1952 times
My Rossi Choice: Rio Grande
Location: Cuero, TX

Re: how difficult is it to install a 3/4 size big loop lever

Postby stevep1954 » 04 Jun 2018 19

i received the lever from Steve and am in the process of installing it. i have a few emails sent to Steve for help with the installation but all told it is pretty easy so far.
stevep1954
Supporter
Supporter
 
Posts: 12
Joined: 15 May 2018
Has thanked: 1 time
Been thanked: 6 times
My Rossi Choice: M92
Location: MN

Re: how difficult is it to install a 3/4 size big loop lever

Postby stevep1954 » 05 Jun 2018 13

i got it installed and it works great. Steve is a BIG help!
stevep1954
Supporter
Supporter
 
Posts: 12
Joined: 15 May 2018
Has thanked: 1 time
Been thanked: 6 times
My Rossi Choice: M92
Location: MN

Re: how difficult is it to install a 3/4 size big loop lever

Postby GasGuzzler » 05 Jun 2018 17

Good job
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
User avatar
GasGuzzler
Supporter
Supporter
 
Posts: 1910
Joined: 02 Nov 2015
Has thanked: 140 times
Been thanked: 211 times
My Rossi Choice: Revolver
Location: Cooke County, TX

Re: how difficult is it to install a 3/4 size big loop lever

Postby stevep1954 » 11 Jun 2018 07

as a follow up, i did have problems with the cartridges chambering and after i asked Steve (Gunz) he thought i needed to take a bit more metal off the part that engages the lifter. he also suggested pinning the two levers together and looking for the differences. after we talked i did notice that the new lever didn't open quite as far as the old one. it was not getting that last push to get the round up to loading height. i'll add a pic to show what i mean. thanks again Steve Gunz! the 3/4 lever he sells is beautiful and well worth the investment.
Image
Image
Image
stevep1954
Supporter
Supporter
 
Posts: 12
Joined: 15 May 2018
Has thanked: 1 time
Been thanked: 6 times
My Rossi Choice: M92
Location: MN


Return to 92

Who is online

Users browsing this forum: No registered users and 8 guests

  • Advertisement