Fixed my .357's feeding problems

Share your experience in caring for your favorite Rossi with other members or ask the question that you cannot find the answer to!

Re: Fixed my .357's feeding problems

Postby dalek » 04 May 2018 20

Quick reply: if/before youtube takes it down, consider full30
dalek
Supporter
Supporter
 
Posts: 104
Joined: 22 Nov 2015
Has thanked: 0 time
Been thanked: 22 times
My Rossi Choice: Ranch Hand
Location: In the mudness

Re: Fixed my .357's feeding problems

Postby rondog » 06 May 2018 11

dalek wrote:Quick reply: if/before youtube takes it down, consider full30

No idea what you're talking about.....
rondog
250 Shots
250 Shots
 
Posts: 270
Joined: 19 Oct 2015
Has thanked: 85 times
Been thanked: 59 times
My Rossi Choice: M92
Location: Colorado

Re: Fixed my .357's feeding problems

Postby alphalimafoxtrot » 06 May 2018 19

rondog wrote:Thanks! I hope they help someone.


You are the man! +guns
I discovered that all along, what I thought was cartridge guides were needing to be shimmed, was wrong. My cartridge stop spring isn't installed correctly - it isn't doing anything!

Of course, I discovered this upon inspection at the range today, when I took my new/old Marlin .35 out as well.

The Rossi 92 feeds .357 no problem, just can't stand the .38's. Now, to tear it apart and get it running right!

I very much appreciate this tech video tutorial series. Thanks!

Adam Lee
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
User avatar
alphalimafoxtrot
Supporter
Supporter
 
Posts: 205
Joined: 15 Dec 2015
Has thanked: 205 times
Been thanked: 37 times
My Rossi Choice: M92
Location: Alexandria Virginia

Re: Fixed my .357's feeding problems

Postby rondog » 06 May 2018 21

alphalimafoxtrot wrote:
rondog wrote:Thanks! I hope they help someone.


You are the man! +guns
I discovered that all along, what I thought was cartridge guides were needing to be shimmed, was wrong. My cartridge stop spring isn't installed correctly - it isn't doing anything!

Of course, I discovered this upon inspection at the range today, when I took my new/old Marlin .35 out as well.

The Rossi 92 feeds .357 no problem, just can't stand the .38's. Now, to tear it apart and get it running right!

I very much appreciate this tech video tutorial series. Thanks!

Adam Lee

Happy to help! Be sure the stop swings over far enough to catch the .38 rims (video 3). And FWIW, Steve's Gunz answered my email, saying that his next step would also be filing more clearance on the stop, so that it swings over far enough. That made me feel good!
rondog
250 Shots
250 Shots
 
Posts: 270
Joined: 19 Oct 2015
Has thanked: 85 times
Been thanked: 59 times
My Rossi Choice: M92
Location: Colorado

Re: Fixed my .357's feeding problems

Postby alphalimafoxtrot » 07 May 2018 04

rondog,

I'm baffled as to why these Rossi 92's are not better checked on this during assembly. I now completely understand why Rossi rifles are NOT in the same price point as Henry lever guns, for example.

If Henry lever guns loaded with a gate, instead of a tube, I'd be all over them like you know what!

But again, I thank you for your detailed videos that clearly show what's going on and how to take care of the problem. I did take a careful look at your final video, and once I take my gun apart and measure the contact angle where the stop hinges, may file those places to enhance the stop function as you demonstrated.

I even took a screen shot of how the stop should function from your final video. Can't tell you how happy I am to have found this out!
rossi 92 bullet stop.jpeg


Adam
You do not have the required permissions to view the files attached to this post.
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
User avatar
alphalimafoxtrot
Supporter
Supporter
 
Posts: 205
Joined: 15 Dec 2015
Has thanked: 205 times
Been thanked: 37 times
My Rossi Choice: M92
Location: Alexandria Virginia

Re: Fixed my .357's feeding problems

Postby rondog » 08 May 2018 00

Yer makin' me blush! But the stop probably doesn't need to come over as far as mine does, I probably overdid it a bit. Just make sure it comes over enough.
rondog
250 Shots
250 Shots
 
Posts: 270
Joined: 19 Oct 2015
Has thanked: 85 times
Been thanked: 59 times
My Rossi Choice: M92
Location: Colorado

Re: Fixed my .357's feeding problems

Postby alphalimafoxtrot » 24 May 2018 04

My .357/.38 Rossi 92 is finally able to feed and eject both rounds after taking my left side guide out of the rifle, and flipping the gate spring to its correct side. Making sure the spring made positive contact within the hinge of the gate was key to my success. There wasn't a need to knock out the hinge pin and do any filing, in my case, so far.

I am certain that if these springs were even only 0.100" longer, it would help even more without gumming anything up. But that's just my 2 cents. I've attached a schematic of a 92 for reference - the spring in question is number 22.
rossi-m92-diagram.jpg

What can I say? Very excited to have tested function with 6 dummy .38's, 6 dummy .357's, and then mixing them all up for a final check.

Every round loaded, ejected, and behaved as it should. Next stop, Myrtle Grove WMA this weekend? Hope so!
Again, glad to have seen your helpful videos and read your tips, Ron!

Adam Lee
You do not have the required permissions to view the files attached to this post.
I am a regular joe, consisting of 78% coffee, 12% hot air, 9% organizational abilities, and 1% luck.
User avatar
alphalimafoxtrot
Supporter
Supporter
 
Posts: 205
Joined: 15 Dec 2015
Has thanked: 205 times
Been thanked: 37 times
My Rossi Choice: M92
Location: Alexandria Virginia

Previous

Return to DIY Gunsmithing, Projects, & Tips!

Who is online

Users browsing this forum: Baidu [Spider] and 3 guests

  • Advertisement