Trying to decide on a "cabin" gun
Forum rules
Keep it civil and mind the rules! Absolutely no ranting!
Keep it civil and mind the rules! Absolutely no ranting!
-
- Posts: 239
- Joined: 18 Oct 2015 15:00
- Location: Washington
- Has thanked: 26 times
- Been thanked: 78 times
Re: Trying to decide on a "cabin" gun
Thanks,
One thing that I forgot to mention. Machine screws are threaded clear to the head. Grind the threads off except at the end of the screw. You do not need the rest of the threads. They will rub against the bottom of the barrel and make it hard/impossible to line up the screw with the threaded portion of the band.
One thing that I forgot to mention. Machine screws are threaded clear to the head. Grind the threads off except at the end of the screw. You do not need the rest of the threads. They will rub against the bottom of the barrel and make it hard/impossible to line up the screw with the threaded portion of the band.
- GasGuzzler
- Moderator
- Posts: 2752
- Joined: 02 Nov 2015 19:54
- Location: Cooke County, TX
- Has thanked: 310 times
- Been thanked: 452 times
Re: Trying to decide on a "cabin" gun
Nice. Pics are helpful. I've read similar fixes here.
__________________________________________________________________________________________
I've always been crazy but it's kept me from going insane.
I've always been crazy but it's kept me from going insane.
-
- Posts: 239
- Joined: 18 Oct 2015 15:00
- Location: Washington
- Has thanked: 26 times
- Been thanked: 78 times
Re: Trying to decide on a "cabin" gun
While I was at it, I beveled the "butt plate" edges and re-blued it. It was actually quite sharp. Now it feels much more refined and polished. Since I had to do some wood work on the forestock, I sanded down both pieces of wood and re-stained them. They are drying now and should be ready for the top coats in the morning.
You do not have the required permissions to view the files attached to this post.
-
- Posts: 239
- Joined: 18 Oct 2015 15:00
- Location: Washington
- Has thanked: 26 times
- Been thanked: 78 times
Re: Trying to decide on a "cabin" gun
Back together again (for now). It still needs a scope rail and the rest of the "action job". Those will have to wait for a bit though. It's amazing how gunky these things are when you first take them apart. However, once you finish cleaning them, replacing a few minor parts and taking care of all the detail work, they are really nice guns. I can see why a lot of people wouldn't like them though. They definitely take some time and attention to go from good to great.
You do not have the required permissions to view the files attached to this post.
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times
Re: Trying to decide on a "cabin" gun
Good deal, good to hear that the rifle is up and running.
Michael
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)
![Image](http://www.ranchdogoutdoors.com/GIF/press1.gif)
-
- Posts: 239
- Joined: 18 Oct 2015 15:00
- Location: Washington
- Has thanked: 26 times
- Been thanked: 78 times
Re: Trying to decide on a "cabin" gun
I never have gotten around to seeing how much it would be to drill and tap the Ranch Hand for optics, so I finally just ordered a Pearson's rail. It showed up today. The springs for the action job will be here this week as well, so I will put it all together at the same time.
You do not have the required permissions to view the files attached to this post.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
-
- Posts: 239
- Joined: 18 Oct 2015 15:00
- Location: Washington
- Has thanked: 26 times
- Been thanked: 78 times
Re: Trying to decide on a "cabin" gun
Done. The hardest part about mounting the Pearson's rail is fitting the dovetail block. It took quite a bit of filing, but that is better than it being too small. It's not as sleek as the NOE rail, but since the Ranch Hand isn't already drilled and tapped, it is a really good alternative. Quality looks to be very nice on it as well. Overall I'd say it was a good product and a good option.
You do not have the required permissions to view the files attached to this post.
- akuser47
- Founding Member
- Posts: 5070
- Joined: 12 Feb 2012 11:43
- Location: ohio
- Has thanked: 1266 times
- Been thanked: 482 times
- Ranch Dog
- Site Admin
- Posts: 9399
- Joined: 23 Jan 2012 07:44
- Location: Inez, TX
- Has thanked: 1838 times
- Been thanked: 2281 times