Alloy question

Take total control of your projectiles by casting your own!
Post Reply
ddj
Posts: 75
Joined: 06 Apr 2014 14:21
Location: MN
Has thanked: 49 times
Been thanked: 23 times

Alloy question

Post by ddj »

This may be one of those stupid questions but its something I'm wondering about. Right now I have about 200 lbs of pure lead and I also have a pretty good supply of block tin. I want to stiffen up my pure lead with some tin. I've seen all the ratios-1:10,etc- but how is that determined? By weight or by volume? Thanks
donhuff
1000 Shots
1000 Shots
Posts: 1650
Joined: 03 May 2013 10:14
Location: LaGrange Georgia
Has thanked: 7 times
Been thanked: 339 times

Re: Alloy question

Post by donhuff »

Weight

But adding tin does not do much for Harding the lead. It does a little , but to harden better, and to save that tin, I would suggest you use antimony to do the hardening. and use your tin to make the molds fill out better.

Roto Metals has an alloy called "super hard" that is a high percent of antimony that is easy to use and just a little will harden up that soft lead.
Don Huff

to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
ddj
Posts: 75
Joined: 06 Apr 2014 14:21
Location: MN
Has thanked: 49 times
Been thanked: 23 times

Re: Alloy question

Post by ddj »

Thanks Don! I'm fairly new to casting and I'm trying to learn as much as I can and its people like you that are helping me a long the way. Thanks again. Dave
donhuff
1000 Shots
1000 Shots
Posts: 1650
Joined: 03 May 2013 10:14
Location: LaGrange Georgia
Has thanked: 7 times
Been thanked: 339 times

Re: Alloy question

Post by donhuff »

ddj

Lots of info here http://castboolits.gunloads.com/showthr ... alculators
to help you with how to mix for your preferred alloy.
Don Huff

to bad those that know it all, cant do it all!
16" SS 92 357
20" BL 92 357
20" SS 92 44
20" BL 92 44
20" Bl 92 45C
20" Bl 92 454
SS Rio Grande 30-30
Bl Rio Grande 45-70
User avatar
Missionary
Founding Member
Founding Member
Posts: 588
Joined: 21 Mar 2012 15:47
Location: Peru
Has thanked: 9 times
Been thanked: 145 times

Re: Alloy question

Post by Missionary »

Greetings
Yep the Castboolits sight is cocked full of info about alloys. One whole forum is devoted to that.
Me I would start looking into buying, trading for but getting soem wheel weights.
Scrap yards, truck tire dealers are good sources. WW will let you get good hardness using it straight and mixing it with your pure. I use a 50-50 mix of the WW and Pure for 85 % of my casting. I add 1% tin if I seeI need to to get good lead filling in the mold.
There are fellers who would happily trade WW for pure lead.
Mike in Peru
Way down south in Arequipa, Peru till June 2020.
Post Reply